[SOLVED] Acer TravelMate 6000 - wireless not be recognized

Started by jpor, March 30, 2016, 02:45:43 AM

Previous topic - Next topic

jpor

Hello Community

I have a pen with Backbox 3.0, and everything is fine unless the wireless does not work.
(it is possible record changes in the pen to work after a reboot?)
When I try to enable the wireless, it gives me an error and locks the computer: "...[885.256017] CR2: 000000000000004c"

Computer Brand Name: Acer TravelMate 6000 (6003LCi)
Network Card: Broadcom BCM4309 802.11b/g Wireless NIC
Hardware ID: PCI\VEN_14E4&DEV_4318&SUBSYS_03121468&REV_02


Thanks

ZEROF

#1
Hi,

Pls download BackBox 4.5.1 and if you have issue with that drivers check this topic:
https://forum.backbox.org/software-support/backbox-4-5-broadcom-wireless-fix/

Cheers!

Don't ask, read : http://wiki.backbox.org
or just run sudo rm -rf /*

jpor

Hi ZeroF,

My little old computer does not run that version.
It freeze in the boot.

Thanks

ZEROF

#3
Hm,

From i can see you can push up to 2gb of ram etc.., BBox 4.5.1 will be ok even with 1gb for basic stuff. But, before try this:

sudo apt-get remove --purge bcmwl-kernel-source
sudo apt-get autoremove
sudo apt-get install linux-firmware-nonfree

Good luck.

Don't ask, read : http://wiki.backbox.org
or just run sudo rm -rf /*