[ERROR]: Veil-Evasion is only supported On Ubuntu 15.10 or higher!

[codehunter]

I tried to install veil-framework on backbox 4.6 but here is the problem -->>

================================================================
                      Veil Project Installer                   
================================================================

• Cloning Veil Framework Repos
  Cloning into 'Veil-Evasion'...
  remote: Counting objects: 3755, done.
  remote: Total 3755 (delta 0), reused 0 (delta 0), pack-reused 3755
  Receiving objects: 100% (3755/3755), 241.87 MiB | 37.00 KiB/s, done.
  Resolving deltas: 100% (2123/2123), done.
  Checking connectivity... done.
  Checking out files: 100% (313/313), done.
  ==========================================================================
               Veil-Evasion (Setup Script) | [Updated]: 2016-09-09
  ==========================================================================
    [Web]: https://www.veil-framework.com/ | [Twitter]: @VeilFramework
  ==========================================================================
  
  Ubuntu 14 x86_64 detected...
  
  [ERROR]: Veil-Evasion is only supported On Ubuntu 15.10 or higher!
  

[alex9393]

you need to git clone the special backbox script for this in order to use veil evasion . Its a little trick , will tell send you a pm

[alex9393]

OK so what you have to do is the following:

step 1)  git clone https://github.com/Veil-Framework/Veil-Evasion.git
step 2)  git clone https://github.com/Odyssey2247/veil4backbox.git
step 3) cd veil4backbox
step 4) chmod +x setup-backbox.sh
step 5) move the script to the veil setup folder /// mv setup-backbox.sh ~/Veil-Evasion/setup
step 6) cd ~/Veil-Evasion/setup
setp 7) ./setup-backbox.sh

You are good to go !
cheers

[codehunter]

Thanks! :D